ACCESS COVER INSTALL – LARGE TILE
If your tile is greater than 6”x6” follow the steps below for Access Cover installation. If your
tile is smaller than 6”x6” inches proceed to page 15.
1
Adhere the Cutting Template to the edge of the tile that aligns with the Access Opening.
2
Cut
precisely along the black line.
3
Remove the Access Cover Tile from the Field Tile.
Cut precisely to
the template. The Quick Dry Adhesive will not span large gaps. The Access Cover Frame should fit
tightly to the Field Tile.
a
1
Lightly bevel the bottom edges of the Field Tile 1-5 degrees.
2
Install the Access Cover Tray and
Frame into the cutout.
3
Turn over onto a flat surface, making sure the rim of the Access Cover Frame
and Field Tile are flush. Apply Quick Dry Adhesive between the Field Tile and Access Cover Frame.
b
1
Lightly bevel the bottom edges of the Access Cover Tile until it fits.
2
Use thinset mortar or Quick
Dry Adhesive to bond the tile into the Tray.
3
Remove the Cutting Template as soon as possible. This
assembly can now be installed.
c
NOTICE: Use the supplied Wax Stick to
wax the Access Cover tray. Waxing the
Cover prevents accidental bonding of
mortar or adhesive. It also prevents
mineral build up and aids in future
removal.
!
14
For more information visit ebbe-america.com
1
2
1
2
3
1
2
3
Bevel lower
edge
Bevel Lower
edges
Field Tile
Access Cover
Tile
