•
Brush Kits are sold separately.
2. Using a cleaning agent as
recommended above, apply an
ample amount into the Drain
Channel from the top side and also
into the Main Channel through the
Access Opening.
1. Remove the Access Cover by pushing down on the black tab at the center of the Access Cover with a
screwdriver, putty knife, or similar tool. The Access Cover will pop up and allow you to grab and remove it.
Note: Make sure to push the D-
shaped Brush to the end of the
channel, moving any debris to the
Drain Channel. (
Tile not shown for
clarity)
INNI CARE AND MAINTENANCE GUIDE
20
For more information visit ebbe-america.com
Recommended
Cleaning Agents
•
Most typical
bathroom cleaners
and bleach are safe
to use.
•
Avoid overly acidic
or basic cleaners.
3. Holding the D-shaped Brush with
your finger, lower the Brush into
the Access Opening with the
straight side parallel to the Drain
Channel. Push the Brush forward
into the Main Channel and pull
back and forth several times to
clean. If possible, avoid rubbing
the Brush shaft on the lower
perimeter of the Access Cover
Frame.
•
To purchase the brushes, follow the QR link or go to:
ebbe-america.com. We will custom cut the brushes
to fit your INNI.
