For more information visit ebbe-america.com
1. Apply sealant to the Access Cover Frame and set into the Access Opening.
2. Align the Frame with the Drain Channel edge or In-Sight trim.
1. Cut and install the floor tile around the Access Cover Frame.
2. Apply sealant, thinset, or quick dry adhesive to Access Cover Tray 3. Cut and install Access
Cover tile flush with Tray perimeter.
b
Re-Install the Access Cover Tray
by angling the cover down to
the Drain Channel until the ball
detents catch the Access Cover
Frame. Push the cover down
until flush.
ACCESS COVER INSTALL – SMALL TILE
If your tile is smaller than 6” follow the steps below to install the Access Tray. If your tile is
6” or larger, see page 14
a
c
NOTICE: Use the supplied Wax Stick to wax the
Access Cover Tray. Waxing the cover prevents
accidental bonding of mortar or adhesive. It also
prevents mineral build up and aids in future
removal.
!
15
1
2
3
1
2
Access Cover Frame
