background image

Environment

Contextual help of the web interface  –  71

Press Save after modifications.

3.6.1.3  Note:

3.6.1.4  Access rights per profiles

Administrator

Operator

Viewer

Environment/Commissioning

Environment/Status

3.6.1.4.1  For other access rights

3.6.1.5  Troubleshooting

EMP communication status shows "Lost"

In  the  Network  Module, in  

Contextual  help>>>Environment>>>Commissioning/Status

 ,  EMPs  are  missing  in  the  Sensor 

commissioning table.

Symptom #1

The connection status of the sensor is "Lost"

Possible causes

The EMPs are not powered by the Network module.

Action #1-1

Launch again the discovery, if it is still not ok, go to Action #1-2.

Action #1-2

1- Check the EMPs connection and cables.

Refer  to  the  sections  

Servicing  the  EMP>>>Installing  the  EMP>>>Cabling  the  first  EMP  to  the  device

  and  

Servicing  the 

EMP>>>Installing the EMP>>>Daisy chaining 3 EMPs

 .

2- Disconnect and reconnect the USB to RS485 cable.

3- Launch the discovery, if it is still not ok, go to Action #1-3.

Deactivated dry contacts are not displayed and replaced by this icon: 

If the UPS provides temperature compensated battery charging option, see the 

Servicing the EMP>>>Using the 

EMP for temperature compensated battery charging

 section.

For other access rights, see the 

Information>>>Access rights per profiles

  section.

Содержание Network-M3







































































































































































































































































































Отзывы: