Eaton Network-M3, Руководство пользователя

Страница: 259 / 294

List of event codes
Information – 259
2306 Warning Bypass breaker open Bypass breaker closed -
2309 Warning Output phases are rotated Output phases wired OK -
2322 Warning Battery temperature too high Battery temperature OK -
2326 Warning Bypass phase out range Bypass phase in range -
2327 Warning Bypass voltage out of range Bypass voltage in range -
2342 Warning Overload pre-alarm No overload pre-alarm -
2364 Warning Internal failure End of internal failure -
2366 Warning Bypass bad wiring Bypass wiring OK -
2369 Warning Battery low state of charge Battery state of charge OK -
2384 Warning Major alarm condition that makes
the device fail No longer major alarm condition that
makes the device fail -
2395 Warning Bypass frequency out of sync Bypass frequency no longer out of sync -
2396 Warning Input frequency out of sync Input frequency no longer out of sync -
2397 Warning Output frequency out of sync Output frequency no longer out of sync -
7.5.3.3 Info
Code Severity Active message Non-active message Advice
2014 Info Building alarm 6 No building alarm 6 -
2015 Info Building alarm 5 No building alarm 5 -
2016 Info Building alarm 4 No building alarm 4 -
2017 Info Building alarm 3 No building alarm 3 -
2018 Info Building alarm 2 No building alarm 2 -
2019 Info Building alarm 1 No building alarm 1 -
2038 Info Bypass AC sensor not
calibrated Bypass AC sensor OK -
2039 Info Input AC sensor not calibrated Input AC sensor calibrated -
2040 Info Output AC sensor not
calibrated Output AC sensor calibrated -
2041 Info Inverter sensor not calibrated Inverter sensor calibrated -
2042 Info DC bus sensor not calibrated DC bus sensor calibrated -
2043 Info Output AC current sensor not
calibrated Output AC current sensor calibrated -