Eaton Network-M3 Скачать руководство пользователя страница 45

Страница: 45 / 294

Controls

Contextual help of the web interface – 45

•
•

•

3.4 Controls

3.4.1 Entire UPS

Controls are displayed for the entire UPS, and not for specific outlet options.

The table in this section displays UPS status, the associated commands (on/off), and the pending action.

3.4.1.1 Status

Reflects the current mode of the UPS. The following is a list of potential table values that are displayed based on the UPS topology.

On — Protected/Not protected
Off — Not powered/Not protected

3.4.1.2 Commands

A set of commands are available and activated when one of the following buttons is pressed. A confirmation window appears.

Safe OFF

This will shut off the load. Protected applications will be safely powered down.

This control is available only if the status is not OFF and if there are no active commands running.

Safe reboot

This will shut off and then switch ON the load. Protected applications will be safely powered down.

This control is available only if the status is not OFF and if there are no active commands running.

Switch ON

This will switch ON the load or turn ON the online UPS.

This control is available when the status is OFF, if there are no active commands running and if the Online UPS is on bypass.

3.4.1.3 Pending action

Displays the delay before shutdown and delays before startup.

Содержание Network-M3







































































































































































































































































































Результаты поиска

Содержание Network-M3

Отзывы:

Похожие инструкции для Network-M3

Бренды по названию

Популярные бренды

Eaton Network-M3, Руководство пользователя

Результаты поиска

Содержание Network-M3

Отзывы:

Похожие инструкции для Network-M3

Бренды по названию

Популярные бренды