Eaton easyE, Руководство пользователя, Страница: 86 / 111

7. Operation
7.2 Device menus
7.2.11 Import / Export menu
The *.rtd visualization project file can be imported and exported directly to a USB
drive with this menu.
Page 1 Import For imports, you can select the specific part of the *.rtd file that you want to transfer to the
RTD through the USB port.
Page 2 Export For exports, all the information for the RTD's configuration and for the visualization, as well as
the information specifying which easyE4 devices are part of the visualization, will be grouped
together in an *.rtd file.
As a result, the *.e80 project can be reconstructed in easySoft.
Import
/
Fig. 47: Import / Export
When importing a file, the file will be the visualization project file for the RTD.
The system will search through all the directories on the USB drive and list all files
with the *.rtd extension.
The previous *.conf RTD configuration file on EASY-RTD-DC-43-
03B1-00 devices is being replaced by an *.rtd visualization project
file with firmware update FW ≧ 1.0.
If you need to convert a *.conf file to an *.rtd file, please contact
Eaton Service.
Only one visualization project is allowed per RTD.
Importing a project through the USB port or a transfer via Ethernet
will overwrite the existing visualization project on the RTD.
Plug a USB drive into the USB port.
Firmware files for the RTD can be loaded with the Update menu.
86
easyE Remote Touch Display 01/24 MN048027EN Eaton.com