Eaton easyE, Руководство пользователя, Страница: 80 / 111

7. Operation
7.2 Device menus
7.2.10 Setup Wizard menu
To make it easier to set up the RTD, there is a Setup Wizard available that will ask
you for all the relevant settings for the device's operation and then give you the
option of saving the corresponding *.rtd visualization project file. The Setup Wizard
will start after you select the menu language you want.
Recommendation: If you connect the RTD to aneasyE4 device in advance, the wizard
will directly search for available easyE4 devices so that they will be available for
selection. → Section "Connecting to the RTD", page 89
Familiarize yourself with how to use the RTD→ Section "Handling easyE Remote
Touch Display", page 63.
/
Fig. 32: Selecting a language for the wizard
Recommendation: If you have already connected the easyE4, tapping Next will make
the device search for available devices so that they will be available for selection.
Connect the RTD to an easyE4, → Section "Connecting to the RTD", page 89
/
Fig. 33: Setup step 1
Tap Back to exit the Setup Wizard.
To load an existing *.rtd visualization project file through the USB port, tap Next.
80
easyE Remote Touch Display 01/24 MN048027EN Eaton.com