Eaton easyE, Руководство пользователя, Страница: 33 / 111

2. Safety regulations
2.3 Device-specific hazards
stiffness and the device is properly mounted.
l
Minimum sheet thickness of control cabinet where the device will
be flush mounted:
2 mm (0.08") ≦ d ≦ 5 mm (0.2")
CAUTION
When using commercially available peripheral devices (e.g., with the
USB port), it is important to keep in mind that their EMC interference
immunity parameters may render them unsuitable for use in industrial
environments.
Do not use the USB port on the RTD for any purposes other than
those intended by the manufacturer.
CAUTION
FORCES ON THE ETHERNET INTERFACE
Communications may be affected, and the connection's mechanical
components may be damaged, if the Ethernet interface is subjected
to strong vibrations or the RJ45 plug-in connection is subjected to pul-
ling.
l
Protect the RJ45 plug-in connection from strong vibrations.
l
Protect the RJ45 plug-in connection from tensile forces at the
socket.
WARNING
RTD units are products designed for use in industrial environments
as defined in ICE/EN 6100−6-4. These products can cause radio inter-
ference in domestic environments. In this case, the party operating
the products must implement appropriate radio interference sup-
pression measures.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
33