Eaton easyE, Руководство пользователя, Страница: 61 / 111

6. Running the RTD
6.1 Visualization
6. Running the RTD
Once the easyE Remote Touch Display has been initially commissioned, it will run
whenever it is connected to the power supply.
In other words, it does not have to be separately switched on and off.
Reducing the level of brightness will increase the display back-
light's lifespan.
→ Section " Display menu", page 76
Follow the instructions in the following section if your RTD until will
not boot up and/or if an error message appears → Section "Faults",
page 97
To display and operate the connected easyE4 device, select the easyE4 mirroring
device menu.
You can set up the configuration in such a way that the easyE4 mirroring device
menu will be automatically opened when the display is activated.
6.1 Visualization
available only for easyE RTD Advanced EASY-RTD-DC-43-03B2-00
To open the visualization project on the easyE RTD Advanced, select the easyE4
visualization device menu.
Access to the visualization will be password-protected. The displays and controls
available on the RTD will depend on the specific user group that is logged in – Watch-
ers, Operators, or Administrators.
To import the visualization project, the Administrators group needs
to be logged in.
→ Section " Import / Export menu", page 86
6.1.1 easyE RTD Advanced – loading the visualization project through the USB port
In addition to transferring the project through the Ethernet connection (with the Com-
munication tab in easySoft), the visualization project can be imported or exported
through the USB port on the RTD.
A function key for returning to the easyE RTD Advanced device
menu needs to be configured in the visualization project.
The visualization project can also be imported with the Setup Wizard.
Only one visualization project is allowed per RTD.
Importing a project through the USB port or a transfer via
Ethernet will overwrite the existing visualization project on
the RTD.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
61