Eaton easyE Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 111

Eaton easyE Скачать руководство пользователя страница 16

1. Description

Engineering information

The easyE RTD Standard can only be used to mirror the display of a connected
easyE4 at the same time.
It is possible to switch back and forth between several easyE4 basic devices.

The easyE RTD Advanced can only mirror the display of a connected easyE4 in the
easyE4 mirroring device menu.
The visualization project makes it possible to have the easyE4 visualization device
menu on the easyE RTD Advanced.
In an easySoft project, a maximum of four easyE RTD Advanced per easyE4 device
and a maximum of eight easyE4 devices can be configured and stored as a visua-
lization project.
The visualization project for the easyE RTD Advanced needs to be created with
easySoft.

In addition, a series of password-protected permissions can be used in the visua-
lization project so that the easyE RTD Advanced can only used by authorized per-
sonnel to display and operate the easyE4.

In addition to the configuration for the RTD, the *.rtd visualization project contains
the visualization project for the easyE RTD Advanced. Both parts can be imported
independently of each other.

The previous *.conf RTD configuration file on EASY-RTD-DC-43-
03B1-00 devices is being replaced by an *.rtd visualization project
file with firmware update FW ≧ 1.0.
If you need to convert a *.conf file to an *.rtd file, please contact
Eaton Service.

easyE RTD Standard and easyE RTD Advanced:
easyE4 mirroring (formerly Remote easyE4)

Only easyE RTD Advanced:
easyE4 visualization and easyE4 mirroring

Fig. 1: Availability of device menu on RTD as a function of the easyE4

The required RJ45 Ethernet cable is not included as standard.

16

easyE Remote Touch Display

01/24 MN048027EN Eaton.com

«
...
14
15
16
17
18
...
»

Содержание easyE
















































































































Отзывы:

Нет отзывов