Eaton easyE Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 111

Eaton easyE Скачать руководство пользователя страница 28

2. Safety regulations
2.2 Mandatory requirements, personnel requirements

2.2.3 Device documentation

This manual is considered an integral part of the easyE RTD and must always be rea-
dily available in the device's close proximity so that users have access to it.

Make sure that every person who will be working with the RTD, regardless of the life-
cycle stage involved, has read and understood the relevant parts of the docu-
mentation for the RTD.

For more information on how to use the RTD, including the corresponding installation
instructions, please visit the Eaton Download Center and the relevant product pages.

WARNING
Incomplete operator manual copies

Working with individual pages taken out from the operator manual
may lead to bodily injury and property damage due to failure to
observe relevant safety information.

Always work with the latest and full document.

2.2.4 Installation, maintenance, and disposal

Make sure that the RTD is connected, installed, serviced, and disposed of pro-
fessionally and in line with all relevant standards and safety rules.

CAUTION

Installation requires qualified electrician

Dispose of recyclables as required by your local recycling regulations.

Dispose of recyclables as required by your local recycling regu-
lations.

RTD no longer being used must be professionally disposed of as per local standards
or returned to the manufacturer or relevant sales department.

28

easyE Remote Touch Display

01/24 MN048027EN Eaton.com

«
...
26
27
28
29
30
...
»

Содержание easyE
















































































































Отзывы:

Нет отзывов