Eaton easyE, Руководство пользователя, Страница: 81 / 111

7. Operation
7.2 Device menus
If USB access has not been enabled in the Security → page 79 yet, you can enable
it now.
/
Fig. 34: Setup step 2
The *.rtd file must have been stored in a subdirectory of mnt/sda1/.
If the visualization project file has been saved from easySoft, it will be found in the
VPROGRAM subdirectory by default.
Tapping Yes will access the USB host directly.
If you tap No you will be taken directly to Setup step 4.
If there are multiple files available for selection, scroll until you get to the one you
want.
/
Fig. 35: Setup step 2 - selecting an existing visualization project file
If a USB drive is not detected, a message to this effect will appear.
As soon as the visualization project file parts have been loaded in the easyE RTD
Advanced, the corresponding settings will be applied and a message will be shown.
The following steps will have you configure additional settings.
The six-character password for the Watchers user group needs to be entered and
confirmed first.
This is then followed by the passwords for the Operators and Administrators group.
easyE Remote Touch Display 01/24 MN048027EN Eaton.com
81