Eaton easyE, Руководство пользователя, Страница: 84 / 111

7. Operation
7.2 Device menus
If multiple easyE4 devices are found when the Setup Wizard starts,
the device selected at that point will be shown highlighted in gray
here.
Tapping Next will complete the configuration steps in the Setup Wizard.
The selected easyE4 device will be used as the default connection together with the
set passwords, the network settings for the RTD, and the auto login setting in the visu-
alization project file.
In the next step, you can save the resulting visualization project file (RTD config) on a
USB drive.
If you choose to save the file, it will be saved in the root directory
(saving the file in subdirectories is not possible).
/
Fig. 42: Setup step 6 - saving the setup configuration as an *.rtd file
After this, you can connect the RTD directly to the easyE4.
In order for this to work, the setting on the easyE4 in System Options, Ethernet, easyE
RTD must allow this access.
/
Fig. 43: Setup step 7 - directly establishing a connection
You can then connect to the easyE4 set as a default in the visualization project file.
84
easyE Remote Touch Display 01/24 MN048027EN Eaton.com