47
Amended: Jan 2014
The SYNCH button when pressed will cause the Amber led to illuminate, a second press flashing
quickly followed shortly by a slow flash. The Hybrid at this time will search for other hybrids in range, if
it finds any it will illuminate the led steady and then continue with the search until the synch button is
pressed again to extinguish the led and stop the search.
If there are a number of hybrids one must be set to master and the other to slaves using the jumper
J2 on the pcb of the hybrid.
Following the maintenance Autolearn the program can be extracted from the panel using the latest
Site installer version 2.5.31.9
FIG 42
The Hybrid has its own connection
– a standard USB 2.0 connection. Once connected to the
computer right click on the Hybrid icon and configure the comm port and extract the device
information from the hybrid.
FIG 43
