Eaton DC1-S1011NB-A20CE1 1, Инструкция по установке и настройке параметров

Страница: 99 / 173

4 Accessories
4.6 Braking resistances
DC1-S…20…, DC1-S…OE1 Variable Frequency Drives 05/21 MN040058EN www.eaton.com
95
Table 21: Braking resistors – DC1-S… 230 V nominal voltage
￫
DX-BR100 braking resistors feature a temperature switch for
protection against thermal overload.
This dry contact (N/C) can be directly integrated into the DC1-S…
variable frequency drive’s control section and work as an
external fault message (EXFLT), for example.
The DX-BR3-100 resistor does not feature a circuit-breaker.
It is inserted into the corresponding slots on the DC1-S…
variable frequency drive’s heat sinks (frame size FS2) and is
automatically protected against thermal overload as a result (heat
sink overtemperature, display:
O-t
).
The braking resistor is connected to the variable frequency
drive’s DC+ and BR terminals using the prefabricated cables.
The braking chopper is activated with parameter P-34
(
￫ section 6.6.3, ““Extended” parameter group”, page 148).
￫
For more information and technical data on the DX-BR… braking
resistors listed here, please refer to the corresponding
instruction leaflet (IL) for the individual designs: IL04012024Z,
IL04011ZU, IL04014ZU, IL04015ZU, IL04021ZU.
ϑ R
B
2

T2
1 T1
Device Type
Frame size
Resistance value Brake Resistor
Type
R
Bmin
R
Brec
P
max
R
Brec
P
max
DF t
Brems
Ω Ω kW Ω kW % s
Nominal mains voltage: 115 V
Mains voltage: (50/60 Hz) U
LN
110 (-10 %) - 115 (+10 %) V | U
e
115 V AC, single-phase / U
2
115 V AC, single-phase
DC1-S1011NB-A20CE1 FS2 100 100 0.55
DX-BR3-100 100 0.2 36 44
DX-BR100-100 100 0.1 18 22
Nominal mains voltage: 230 V
Mains voltage: (50/60 Hz) U
LN
200 (-10 %) - 240 (+10 %) V | U
e
230 V AC, single-phase / U
2
230 V AC, single-phase
DC1-S2011NB-A20CE1
FS2 100 100 1.1
DX-BR3-100 100 0.2 18 22
DC1-S2011FB-A20CE1 DX-BR100-100 100 0.1 9 11
DX-BR100-240 100 0.24 22 26
R
Bmin
= Minimum permissible resistance
R
Brec
= Recommended resistance
P
max
= Rated power