Eaton DC1-S1011NB-A20CE1 1, Инструкция по установке и настройке параметров

Страница: 79 / 173

3 Installation
3.6 Electrical Installation
DC1-S…20…, DC1-S…OE1 Variable Frequency Drives 05/21 MN040058EN www.eaton.com
75
3.6.2.1 Terminal capacities and stripping lengths
The terminal capacities and stripping lengths are listed in the following table.
Table 10: Control signal terminal sizes and designs
3.6.2.2 Control signal terminal connection information and functions
The functions that are set in the ex-factory and the electrical connection data
of all control signal terminals are listed in the following table.
Table 11: Factory-set functions of the control signal terminals (IP20)
M3
mm2 mm2 AWG mm in Nm ft-lbs mm
0.2 - 2.5 0.2 - 1.5 24 - 12 5 0.2 0.5 0.42 0.4 x 2.5
Connection
terminal Signal Description Default Setting
1 +24V Control voltage for the
digital inputs 100 mA max.
Reference potential: 0 V
(terminals 7 and 9) –
2 DI1 Digital Input 1 8 - 30 V = HIGH, R
i
> 6 k Ω FWD
3 DI2 Digital input 2 8 - 30 V = HIGH, R
i
> 6 k Ω Select Quick-dec
4 AI2/DI3 Analog input 2 or digital
input 3 analog:
0 - 10 V, R
i
> 72 k Ω
0/4 - 20 mA, R
B
= 500 Ω
digital:
8 - 30 V = HIGH, R
i
> 72 k Ω
Select AI1REF/f-Fix1
5 +10 V Reference voltage 10 mA max.
Reference potential: 0 V
(terminals 7 and 9) –
6 AI1/DI4 Analog input 1 or digital
input 4 analog:
0 - 10 V, R
i
> 72 k Ω
0/4 - 20 mA, R
B
= 500 Ω
digital:
8 - 30 V = HIGH, R
i
> 72 k Ω
AI1 REF
(analog, 0 - 10 V)
7 0 V Common reference potential for all digital and analog inputs
and outputs together with terminal 9 –
8 AO1/DO1 Analog output 1 or
digital output 1 analog:
0 - 10 V, 20 mA max
digital:
0/24 V, 20 mA max
Output Frequency
(analog, 0 - 10 V)
9 0 V Common reference potential for all digital and analog inputs
and outputs together with terminal 7 –
10 K13
Relay RO1 (normally
open)
250 V, 6 A AC/30 V, 5 A DC
RUN, enable signal for
device activated
11 K14