IQ DP-4000
SAFETY
PRECAUTIONS AND
PRELIMINARY
COMMENTS
PRECAUTIONS
AND
SAFETY
This Technical Document covers all aspects of
installation, operation, and unit-level maintenance of the
IQ DP-4000. This document is a guide only for
authorized and qualified personnel who select and use
the IQ DP-4000. Please refer to the specific Warning
and Caution in this section before proceeding. If you
require further information regarding a particular
installation, application, or maintenance activity, contact
your Cutler-Hammer Representative.
Warrantee and Liability Information
No warranties, expressed or implied,
including
warranties of fitness for a particular purpose of
merchantability, or warranties arising from course of
dealing or usage of trade are made regarding this
information,
recommendations,
and
descriptions
contained herein. In no event will Cutler-Hammer be
responsible to the purchaser or user in contract, in tort
(including negligence), strict liability, or otherwise for any
special, indirect, incidental, or consequential damage or
loss whatsoever, including but not limited to damage or
loss of use of equipment plant or power system , cost of
capital, loss of power, additional expenses in the use of
existing power facilities, or claims against the purchaser
or user by its customers resulting from the use of the
information and descriptions contained herein.
vi
TD1 7548A
LIABILITY INFORMATION
Safety Precaution
All safety codes, safety standards, and/or regulations
m ust be strictly observed in the installation, operation,
and maintenance of this device.
AwARNING
THE WARNINGS AND CAUTIONS INCLUDED AS
PART OF THE PROCEDURAL STEPS IN THIS
DOCUMENT ARE FOR PERSONNEL SAFETY AND
PROTECTION OF EQUIPMENT FROM DAMAGE. AN
EXAMPLE OF A TYPICAL WARNIN G LABEL IS
SHOWN
ABOVE
IN
REVERSE
TYPE
TO
FAMILIARIZE PERSONNEL WITH THE STYLE OF
PRESENTATION. THIS WILL HELP TO ENSURE
THAT PERSONNEL ARE ALERT TO WARNINGS
WHICH
MAY
APPEAR
THROUGHOUT
THE
DOCUMENT. IN ADDITION, CAUTIONS ARE ALL
U PPER CASE AND BOLDFACED AS SHOWN
BELOW.
AcAUTION
COMPLETELY READ AND UNDERSTAND THE
MATERIAL PRESENTED IN THIS DOCUMENT
BEFORE ATTEMPTING TO INSTALL, OPERATE OR
USE THE EQUIPMENT. IN ADDITION, ONLY
QUALIFIED PERSONS SHOULD BE PERMITTED TO
PERFORM ANY WORK ASSOCIATED WITH THE
EQUIPMENT.
ANY
WIRING
INSTRUCTIONS
PRES ENTED IN THIS DOCUM ENT MUST BE
FOLLOWED PRECISELY. FAILUR E TO DO SO
COULD
CAUSE
PERMANENT
EQUIPMENT
DAMAGE.
Factory Correspondence
Contact the Advanced Product Support Center(APSC)
at 1 -800-809-2772 if you have any questions about
operating or troubleshooting the IQ DP-4000.
www
. ElectricalPartManuals
. com
