Eaton Cutler-Hammer D64 Series, Инструкция по эксплуатации

Страница: 18 / 19

PUB 50413
D64RPBH13 SERIES B1 GROUND FAULT RELAY
Revision 2
September, 2009
Page 18
TABLE 1 – CIRCUIT BREAKER TRIP CONTACT STATES
STATE OF CIRCUIT BREAKER TRIP CONTACTS UNDER VARIOUS OPERATING CONDITIONS
WITH DIPSWITCH 12 IN SELECTED POSITIONS
OPERATING
DIPSWITCH 12 IN LEFT POSITION
NON-FAILSAFE MODE
NON-FAILSAFE
(LEFT)
DIPSWITCH 12 IN RIGHT POSITION
FAILSAFE MODE
FAILSAFE
(RIGHT)
CONDITIONS CB TOGGLE
POSITION
11 14 11 12 CB TOGGLE
POSITION
11 14 11 12
1. CONTROL POWER OFF
TRIPPED TRIPPED
2. CONTROL POWER OFF
NORMAL NORMAL
3. CONTROL POWER ON
TRIPPED TRIPPED
4. CONTROL POWER ON
NORMAL NORMAL
5. LOSS OF CONTROL
POWER NORMAL TOGGLE
TRIPS
6. CONTROL POWER ON
FAULT CURRENT ABOVE
TRIP SETTING NORMAL
+ Time Delay
TRIPPED
+ Time
Delay
=
+ Time
Delay
=
NORMAL
+ Time Delay
TRIPPED
+ Time
Delay
= + Time
Delay
=
7. CONTROL POWER ON
FAULT STILL ON SYSTEM
ATTEMPT TO RESET CB
TRIP FREE
TOGGLE
REMAINS
TRIPPED
TOGGLE
REMAINS
TRIPPED
8. CONTROL POWER ON
FAULT CLEARED
NO RESET TRIPPED TRIPPED
9. CONTROL POWER ON
FAULT CLEARED
RESET CB TOGGLE NORMAL NORMAL
10. CONTROL POWER OFF
AFTER GROUND FAULT
TRIP, NO RESET TRIPPED TRIPPED
11. CONTROL POWER OFF
AFTER GROUND FAULT
TRIP, RESET CB TOGGLE NORMAL NORMAL
12. CONTROL POWER
RESTORED, FAULT
STILL ON SYSTEM,
RESET CB TOGGLE NORMAL
+ Time Delay
TRIPPED
+ Time
Delay
=
+ Time
Delay
=
NORMAL
+ Time Delay
TRIPPED
+ Time
Delay
=
+ Time
Delay
=