2 Operator interface
2.7 “Extras” screen
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
29
Table 25: Controls – Location name settings (7“ variant)
Table 26: Controls – User password (7“ variant)
Control
Action
The devices shown in the device overview screen
feature a configurable parameter called
Location
name
. This parameter can be configured in the
Device Overview
screen (Table 10, page 17).
Tap the
List of Locations
button to view and edit all
location names, both for Modbus RTU and
SmartWire-DT devices, in two hardware location
lists.
To open and edit a device location name, tap on the
row with the number corresponding to the device you
want in the location lists. The number represents the
device's hardware address in the corresponding
network.
To go back to the
Extras
screen, tap the
Extras
option in the main menu.
To have the system overwrite the names in the device
overview with the values you entered in the location
lists, tap the
Apply
button in the
Locations names
pane.
After a bit, the button text will change to
Done!
in
order to indicate that the action has been completed.
Control
Action
A user password can be used to lock and unlock all of the
BreakerVisu program‘s configuration functions. The password,
which is case-sensitive, can have a maximum of six characters.
The default password is
123456
.
Note:
Tap the
old password
field to enter the current password
Then tap the
new password
field to enter a new password.
If you enter the old password correctly and the values in the
New
and
Re-type
fields match, you will be able to save the new
password by tapping the
Save
button.
If there is a problem when you try to enter a new password, the
system will show a message, including a description of the
problem, in the corresponding fields.
Содержание BreakerVisu NZM-XMC-MDISP35-MOD
Страница 4: ...2...