2 Operator interface
2.5 “Device details” screen
24
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
The
More data
sub-screen shows additional information regarding the
device's operating conditions. In the case of third-party devices, you will be
able to add additional device parameters.
2.5.2.1 Classic view
Classic view features a number of screens that resemble a multimeter. Tap
the green arrows to move through the screens, which show current voltage,
current, power, and reactive power values.
Figure 17:Device details screens – Classic view (3.5“ variant)
Table 18: Classic view controls (3.5“ variant)
→
Chapter 9, “Importing 3rd party Modbus devices” explains
how to configure third-party devices in detail.
Control
Action
Tap the green arrows to move between the classic view screens.
Tapping the left arrow in the first classic view screen will take you back to the
“Device details” screen.
When you reach the last classic view screen, the right arrow will disappear,
indicating that there are no further screens to access.
Содержание BreakerVisu NZM-XMC-MDISP35-MOD
Страница 4: ...2...