Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Руководство пользователя

Страница: 34 / 88

2 Operator interface
2.7 “Extras” screen
32
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
Table 31: “Extras” screen controls (3.5“ variant)
Figure 25:“Logging memory” screen (3.5“ variant)
Control Action
Tapping this button will take you to the Logging, Locations
screen. This screen points out running measuring functions and
shows an overview of how much memory is being used by the
measurement results (
￫ Figure 25).
Tap this button to access the Ethernet Settings screen
( ￫ Figure 26).
Tap the Modbus RTU button to configure the Modbus RTU
parameters ( ￫ Figure 28).
Tap the Security Settings button to lock/unlock the BreakerVisu
program's configuration elements.
You can change the user password in the
Security Settings
screen ( ￫ Figure 31).
Tap the Licensing button to access the license management
screen ( ￫ Figure 32).
Tap the About button to find out more about the BreakerVisu
program software variant and the last time the program was started
and closed (
￫ Figure 34).