9 Importing 3rd party Modbus devices
9.3 XML configuration file contents
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
51
Table 44: Data word representation
Device parameter
The first 38 parameters in the
XML configuration file template
are set parameters and must be
present even if they are not
being used.
In this case, the length and
offset must be 0. You can add up
to five parameters at the end of
the XML configuration file for
additional parameters (optional).
Name
Name of the device parameter
Length
None of the bytes for the
corresponding group contain
device data. See Group
parameters below.
Set to 0 if the parameter is not
being used.
Offset
Offset for the device data in
the relevant group; the offset
starts from 1.
Set to 0 if the parameter is not
being used.
Group
Name of the group that
contains the data.
Sfactor
Scaling factor – A real number
used to multiply the processed
data before the value is shown
on the BreakerVisu console.
Parameter data will be
processed as required for the
defined graphic representation.
The result will be multiplied by
the scaling factor.
Application Style
Information regarding the
parameter data‘s target format
Byte
representation
Word sequence, coding
Note
1
WORD0 = Hi / WORD1 = Lo
First register with greater significance
2
WORD0 = Lo / WORD1 = Hi
Second register with greater
significance
3
IEEE floating point WORD0 = Lo / WORD1 = Hi
Second register with greater
significance
4
IEEE floating point WORD0 = Hi / WORD1 = Lo
First register with greater significance
Parameter
Subparameters
Description
Notes
Содержание BreakerVisu NZM-XMC-MDISP35-MOD
Страница 4: ...2...