Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Руководство пользователя

Страница: 35 / 88

2 Operator interface
2.7 “Extras” screen
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
33
Table 32: Controls – Location name settings (3.5“ variant)
Figure 26:“Extras” screen for Ethernet settings (3.5“ variant)
Control Action
The devices shown in the Device Overview screen
feature a configurable parameter called Location name .
This parameter can be configured in the Device
Overview screen (Table 17, page 23).
Tap the List of Locations button to view and edit all
location names, both for Modbus RTU and SmartWire-DT
devices, in two hardware location lists.
To open and edit a device location name, tap on the row
with the number corresponding to the device you want in
the location lists.
The number represents the device's hardware address in
the corresponding network.
To go back to the Extras screen, tap the Extras option in
the main menu.
To have the system overwrite the names in the device
overview with the values you entered in the location lists,
tap the
Apply button in the Locations names pane.
After a bit, the button text will change to Done! in order
to indicate that the user action has been completed.