Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Руководство пользователя

Страница: 21 / 88

2 Operator interface
2.5 “Device details” screen
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
19
2.5.1 7“ variant
Figure 8: Device details – Main data (7“ variant)
Table 12: “Device details” controls (7“ variant)
The More data sub-screen shows additional information regarding the
device‘s operating conditions. In the case of third-party devices, you will be
able to add additional device parameters.
Figure 9: “Device details” – “More data” (7“ variant)
The History sub-screen lists the device‘s most recent events. In the case of
trip blocks that feature internal memory containing lists of events, a log of
these events can be stored in a data file on an external storage device
(SD card, USB flash drive) plugged into the BreakerVisu device.
Control Action
There are no special controls in the
“Main data” screen.
You can use the general controls shown
on all device details screens in order to go
back to any option in the main menu or use
the tabs to access one of the sub-screens.
Idle for 15 minutes If the user does not perform any action on
one of the device details screens for more
than 15 minutes, the BreakerVisu program
will automatically switch back to the
BreakerVisu home screen.
￫
￫ Chapter 9, “Importing 3rd party Modbus devices” explains
how to configure third-party devices in detail.