Eaton BreakerVisu NZM-XMC-MDISP35-MOD страница 41 Скачать руководство пользователя | Manualshive

Страница: 41 / 88

background image

3 Connecting devices to Modbus

3.1 Modbus RTU communication parameters

BreakerVisu

06/16 MN01210001Z-EN

www.eaton.com

39

3 Connecting devices to Modbus

For all devices connected to the same network, the Modbus communication
parameters need to be set to the exact same values. In addition, the
corresponding Modbus addresses must match. Once these prerequisites are
met, the BreakerVisu program will be able to detect these devices and
graphically display and log the corresponding data.

3.1 Modbus RTU communication parameters

The settings with Modbus BreakerVisu as a master can be configured in

Extras

, under

Modbus-RTU Settings

.

Figure 20 describes it for the

7“ variant and

Figure 28 describes it for the 3.5“ variant. These are the

settings that the Modbus RTU master will use to communicate with all
slaves.

3.2 Discover devices

The detection routine for connected devices needs to be run every time the
BreakerVisu program is started (e.g., when the device is switched on,
restarted, etc.) if new devices are connected to the network. Once the new
device is detected and identified, all the corresponding device data will be
read. If there are no devices on the Modbus RTU network, the home screen
will display the “Press to discover Modbus-RTU devices” button in the
7“ variant and the “Discover Devices” button in the 3.5“ variant on the
home screen. Simply tap the button to start scanning the Modbus RTU
network with the actual Modbus RTU communication parameters. If you
need to change the Modbus RTU communication parameters, or if there are
any devices that are already in BreakerVisu and that require a new detection
scan, go to

Extras

->

Modbus-RTU Settings

. Then tap the

Discover

Devices

button to start scanning. While the detection process is in progress,

the scanning results will be shown directly in the

Discover Devices

button

and in the home screen. Once it is completed, the total number of connected
devices will be updated in the home screen.

If the connection to a device drops out during operation, it will be
automatically removed from BreakerVisu after a certain time. If the device is
connected to the network again, you will have to tap the

Discover Devices

button again in order to add the device back to the BreakerVisu program.

￫

Please consult the installation manual for each device and follow
the corresponding configuration instructions.
The “Eaton Modbus Configurator” program is available for
configuring the Modbus parameters for NZM-XMC devices.
It is available from the Eaton website at

www.eaton.eu

.

«
...
39
40
41
42
43
...
»

Содержание BreakerVisu NZM-XMC-MDISP35-MOD

























































































Отзывы:

Нет отзывов

Похожие инструкции для BreakerVisu NZM-XMC-MDISP35-MOD

Бренд: DAV TECH Страницы: 10

Бренд: Acclaim Lighting Страницы: 32

BT300 BurnerTronic

Бренд: Lamtec Страницы: 48

Бренд: Magellan Страницы: 2

Бренд: IBA Страницы: 29

Бренд: Reliance Foundry Страницы: 3

Бренд: Wesa Страницы: 8

Бренд: National Instruments Страницы: 19

1020 CAN-RS232-RS422 MFL

Бренд: PENKO Страницы: 29

Бренд: HEROSE Страницы: 92

Бренд: Telit Wireless Solutions Страницы: 45

Бренд: YOKOGAWA Страницы: 33

Бренд: AirCycler Страницы: 2

Torque Converter Lock-Up

Бренд: TS Performance Страницы: 4

Бренд: Danfoss Страницы: 8

Бренд: DAY Страницы: 23

Lift Inverter L1000V

Бренд: YASKAWA Страницы: 282

Бренд: Bardiani Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды