Eaton 93E 30EBC, Руководство по установке

Страница: 33 / 60

Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05 25
8. Remove two bolts securing the pallet extension plate to the pallet and remove the plate (see Figure 12 ).
Retain the plate and bolts for use in Step 9 .
9. Install the pallet extension plate onto the rear of the pallet using the retained bolts (see Figure 14 ). Use
mounting holes provided in the pallet (see Figure 13 ).
10. Use a forklift or pallet jack between the supports on the bottom of the pallet to lift the pallet by
approximately 3 mm (1/8") and remove the skid (see Figure 13 ).
Figure 13. Removing the Rear Shipping Bracket – 93E 30EBC
Shipping Bracket
Bolts
Shipping Bracket
Bolts
Pallet Extension Plate
Mounting Holes (2 places)
Rear Shipping Bracket
Pallet
Skid Bolts (3 places)
Removable Skid
NOTE 1 In the following step the pallet tilts and acts as a ramp once the cabinet is rolled beyond
the center of the pallet.
NOTE 2 The pallet extension may bend when the pallet is tilted, but will continue to provide a
smooth transition to the floor.
Installation