Eaton 93E 30EBC, Руководство по установке

Страница: 10 / 60

2 Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05
11..11 IInnssttaallllaattiioonn FFeeaattuurreess
The EBC is designed to be installed in a line-up-and-match or standalone configurations. In line-up-and-match
configurations power wiring may be routed either external to the cabinet using conduit or the power terminal
wiring channel assembly may be utilized to pass wiring between adjacent cabinets. In standalone
configurations power wiring is routed using external conduit. Connections are made to easily accessible
terminals at the back of the cabinet.
Line-up-and-match battery cabinets are installed adjacent to the UPS. The recommended installation location is
on the right side of the UPS cabinet. See
Figure 2 and Figure 3 for line-up-and-match configuration views.
11..22 M Mooddeell C Coonnffiigguurraattiioonnss
The following model configurations are available:
• 93E 30EBC
– Contains two or three battery strings to be used with the 93E 30 kVA UPS.
– Up to two EBCs with a total of four or six battery strings can be paralleled together to extend the run
time.
NOTE To configure a 30EBC battery system with four strings, two 30EBCs, each with two
strings, must be used.
• 93E 60EBC
– Contains four or six battery strings to be used with the 93E 60 kVA UPS.
– Up to two EBCs with a total of eight, ten, or twelve battery strings can be paralleled together to
extend the run time.
NOTE To configure a 60EBC battery system with eight strings, two 60EBCs, each with four
strings, must be used.
11..33 EEB BC C O Oppttiioonnss
Battery string kits are available to upgrade each 93E 30 EBC from two strings to three strings and each 93E 60
EBC from four strings to six strings. Kits must be installed by an authorized Eaton Customer Service Engineer.
Contact an Eaton sales representative for information.
Introduction