Eaton 93E 30EBC, Руководство по установке

Страница: 49 / 60

Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05 41
44..66 C Coom mpplleettiinngg tthhee IInnssttaallllaattiioonn C Chheecckklliisstt
The final step in installing the EBC is completing the following Installation Checklist. This checklist ensures that
you have completely installed all hardware, cables, and other equipment. Complete all items listed on the
checklist to ensure a smooth installation. Make a copy of the Installation Checklist before filling it out, and
retain the original.
After the installation is complete, an Eaton Customer Service Engineer must verify the operation of the UPS
system and commission it to support the critical load. The service representative cannot perform any
installation tasks other than verifying software and operating setup parameters. Service personnel may request
a copy of the completed Installation Checklist to verify all applicable equipment installations have been
completed.
NOTE The Installation Checklist MUST be completed prior to starting the UPS system for the
first time.
44..77 IInnssttaallllaattiioonn C Chheecckklliisstt
o
All packing materials and restraints have been removed from each cabinet.
o The EBC is installed on a level floor suitable for computer or electronic equipment.
o
The EBC is placed in its installed location
o All conduits and cables are properly routed between the EBC and the UPS.
o All power cables are properly sized and terminated.
o
A ground conductor is properly installed.
o All terminal cover plates are installed.
o Air conditioning equipment is installed and operating correctly.
o The area around the UPS system is clean and dust-free.
o Adequate workspace exists around the EBC and other cabinets.
o Adequate lighting is provided around all EBC and UPS equipment.
o A 120 Vac service outlet is located within 7.5 meters (25 feet) of the EBC and UPS equipment.
o
Startup and operational checks are performed by an authorized Eaton Customer Service Engineer.
o Visit www.eaton.com/pq/register to register your new Eaton UPS / Eaton UPS Accessory.
Installation