Eaton 93E 30EBC, Руководство по установке

Страница: 32 / 60

24 Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05
2. Open the front door (see Figure 12 ) by lifting the latch from the bottom and turning to the right
(counterclockwise) and swing the door open.
3. If the leveling feet are not fully retracted, turn all four leveling feet until they are retracted into the cabinet.
Figure 12. Removing the Front Shipping Bracket – 93E 30EBC
Front Door
Shipping Bracket
Bolts
Shipping Bracket
Bolts
Pallet Extension Plate
(installed for shipping)
Front Shipping Bracket
Pallet
4. Remove four bolts securing the front shipping bracket to the cabinet and four bolts securing the bracket to
the pallet (see
Figure 12 ). Remove the front shipping bracket. If installing the cabinet permanently, retain
the shipping bracket and securing hardware for later use.
5. Remove four bolts securing the rear shipping bracket to the cabinet and four bolts securing the bracket to
the pallet (see
Figure 13 ). Remove the rear shipping bracket. If installing the cabinet permanently, retain
the shipping bracket and securing hardware for later use.
6. Close the door and secure the latch before rolling the cabinet from the pallet.
7. Remove three bolts securing the removable skid (see Figure 13 ).
Installation