Page 34
Technical Documentation EASYRO
®
Water Treatment Systems© 2015 easymetal GmbH.
This information is subject to copyright laws and may not be reproduced or changed without express written permission of easymetal GmbH.
MAINTENANCE BY A TRAINED TECHNICIAN
If you are unable to carry out the maintenance with our instructions or if you prefer a trained
technician services the system for any other reason, please do not hesitate to contact us.
Phone:
+43 2245 20 123
Fax:
+43 2245 20 123 DW 45
E-Mail:
Please make an appointment to have your system serviced.
Please consider that the maintenance takes about 1 – 2 hours.
During this time, a person must be present to open all necessary doors and gates and have ac-
cess to the main water valve or tap unless this is next to the EASYRO
®
unit.
CLEANING AND CARE
IMPORTANT
Never clean the EASYRO
®
unit with a steam cleaner.
Use a soft, damp cloth to clean the housing and the display.
Do not use abrasives, abrasive cleaning sponges, solvents or metal objects.
DECOMMISSIONING THE SYSTEM
If the system is not going to be connected to the power grid for more than 7 days, the
EASYRO
®
must be preserved; otherwise the automatic cycle of flush cannot be executed anymore
and after ten days, there is a danger of bacterial contamination.
The production of healthy and potable drinking water cannot be ensured anymore.
Please contact your retailer to order the appropriate preservative.
The suction process with the preservative is the same as the suction process for the membrane
cleaning solution.
The description is listed in the “Maintenance Instructions” chapter.
