Page 36
Technical Documentation EASYRO
®
Water Treatment Systems© 2015 easymetal GmbH.
This information is subject to copyright laws and may not be reproduced or changed without express written permission of easymetal GmbH.
Your system reports a leak (system leaks water).
The system stops automatically.
Please turn off the water supply and disconnect the power plug.
Call our service hotline.
**********************
* ALARM STOP *
* We 11:12 *
* LEAK *
* 2016 - 09 - 16 *
**********************
This message appears only with systems equipped with an external
pressure-less tank. The message resets automatically once there is
enough water in the tank.
TANK EMPTY
This message appears only with systems equipped with an pressurized
tank.
The internal pressure is too high.
This message is not used during standard operation.
Please disconnect the water outlet of the EasyRO and connect
it again after a short waiting period. Confirm by pressing “OK”.
EasyRO switches back to normal operating mode.
IF NOT, please call our service hotline.
**********************
MOTOR -ALARM
HIGH PRESSURE
**********************
The motor temperature is too high.
The system stops automatically at a temperature of 75 °C and starts
again if the temperature falls to 65 °C.
This message is not used during standard operation. Please make
sure the ventilation slots are not covered.
IF NOT, please call our service hotline.
**********************
MOTOR -ALARM
TEMPERATURE
**********************
