East EAHI-6000-SL-S, Руководство пользователя

Страница: 45 / 66

~ 43 ~
Mode
Asserted by Shorting Terminals
on Inverter
Switch Operation on External DRED
DRM0 R & C Close S1 and S5
DRM1 D1/5&C Close S1
DRM2 D2/6&C Close S2
DRM3 D3/7&C Close S3
DRM4 D4/8&C Close S4
DRM5 D1/5&R Close S5
DRM6 D2/6&R Close S6
DRM7 D3/7&R Close S7
DRM8 D4/8&R Close S8
Ripple Control: In Germany, the grid company uses the Ripple Control Receiver to convert the
grid dispatching signal and send it as a dry contact signal. Wiring of the ripple control receiver
dry contact cables is shown in the figure below.
Boot/Shutdown: Tap Boot/Shutdown to send the boot/shutdown instruction to the inverter. For
Australia and New Zealand, when the DRM state is DRM0, the "Boot" option will be prohibited.
Date Setting/Time Setting: The correct system time is very important. Wrong system time will
directly affect the data logging and power generation value. The clock is in 24-hour format.
Software Version: Version information of the current firmware.
RS485 : Used to connect to the upper computer. (Baud rate is set to 9600 in the communication
setting column on the screen.). Connect the RS485 cable A and cable B to pin 5 and pin 4 of
the RJ45 registered jack respectively, and the registered jack to the RS485 port on the housing.