East EAHI-6000-SL-S, Руководство пользователя

Страница: 4 / 66

~ 2 ~
Chapter 2 Safety Precautions
Make sure to always follow the safety precautions specified herein during operation of the
inverter.
2.1 General safety
NOTE

This document is subject to update from time to time due to product version upgrading or
other reasons. Unless otherwise specified, the contents of this document cannot replace
the safety instructions provided in the product label or user manual. All descriptions
provided herein are intended as use guidance only.

Read this document carefully to understand the products and precautions before
installing the inverter.

All operations of the inverter must be conducted by professional and qualified technicians
who are familiar with the relevant local standards and safety regulations at the place
where the invert is installed.

When the inverter is operated, it is necessary to use insulating tools and wear personal
protective equipment to ensure personal safety. Wear anti-static gloves, anti-static
bracelet and anti-static clothing, etc. when touching electronic devices, to protect the
inverter against static.

Any equipment damage or personnel injury caused by failure to install, use or configure
the inverter as required by this document is not the equipment manufacturer’s
responsibility. Contact the supplier for this document.
2.2 Safety of photovoltaic module
DANGER
Please connect the DC cable of the inverter by using DC wiring terminal supplied with the
product. Using other DC wiring terminals may lead to serious consequences, and the
equipment damage caused there from is not the equipment manufacturer’s responsibility.
WARNING

Make sure to properly earth the component frame and the support system.

After the DC cable is connected, make sure that the cable is tightly connected without
looseness.

Measure the positive and negative poles of DC cable by a multimeter to ensure that the
positive and negative poles are connected correctly and without reverse connection, and
NOTE
The inverter has been designed and tested in strict accordance with safety regulations.
However, for any electrical equipment, the relevant safety instructions should be followed
before any operation on the inverter as any improper operation may lead to serious injury or
property damage.