East EAHI-6000-SL-S, Руководство пользователя

Страница: 35 / 66

~ 33 ~
6.3.2 N and PE cables in the Main Panel shall be wired separately
For other countries, the following diagram is an example for grid systems without special
requirement on wiring connection.
NO Description
1
≤63A/230V/400V AC breaker
2
32A/230V/400V AC breaker
3
Depends on loads
4
Depends on household loads and inverter capacity
5
300mA RCD (Recommended)
6
30mA RCD (Recommended)
Note 1: If the battery is integrated with a readily accessible internal DC breaker, no additional
DC breaker is required.
Note 2: The recommended values in the table are for reference only. The actual values must
comply with local standard and actual conditions.
Note 3: The rated current of breaker
①
is suggested to lower than that of breaker
④
.
Note 4: If the rated current of on-site power cables are lower than those recommended above,
the breakers specification should be considered to match the power cables in first
priority.
Note 5: The AC port takes power from the grid and is set according to the grid circuit breaker.
6.3.3 For TT system
In the TT system, the following diagram is an example for grid systems without special
requirement on wiring connection.