East EAHI-6000-SL-S, Руководство пользователя

Страница: 43 / 66

~ 41 ~
Press ▲ and ▼ on the parameter screen to
switch to " " and press " SET " to return
to the main interface.
NOTE
When the meter is disconnected from the power supply and stops working for more than one
month, you need to confirm the meter parameters again.
During use, the current voltage, current frequency, and other grid information on the system
grid side can be viewed through this meter. When viewing, press the "
▲
" and "
▼
" buttons on
the meter to switch the display interface of the meter. The specific introduction of the display
interface can be found in the electricity meter manual
6.5 Communication end connection
6.5.1 WIFI/Bluetooth remote monitoring module
Fig. 6.5.1
Pin definition
1 2 3 4
Power supply VCC Ground wire GND Data communication
A
Data
communication B
Meanwhile, to use this port, only insert WIFI/Bluetooth module (optional) into this port and
tighten the fixing nut (see the manual of WiFi for detailed operation)
6.5.2 CT RS485 USB DRMS
Fig. 6.5.2 Schematic diagram for LAN interface connection