•. Because.the.receiver.and.servos.will.receive.power.from.the.3-in-1.control.unit,.it.will.now.be.necessary.to.
disable.the.BEC.power.of.the.brushless.ESC.before.connecting.it.to.the.receiver ..To.do.this,.it.will.be.necessary.
to.remove.the.red.(positive).lead.and.connector.from.the.plastic.housing.that.goes.to.the.receiver,.then.to.
insulate.it.properly.to.prevent.shorting ..Use.a.small.screwdriver.or.knife.blade.(and.extreme.care.to.prevent.
injury).to.lift.the.plastic.tab.that.secures.the.connector.in.the.plastic.housing,.then.slide.it.out.the.back.end.of.
the.housing ..Use.tape.or.shrink.tubing.to.insulate.and.secure.the.exposed.connector .
Note: It is extremely important to disable the BEC of the brushless ESC in order to prevent damage to
the other electronics. Remember, BEC power is already supplied to the receiver and servos through
the -in-1 control unit throttle and rudder leads.
•. Now.that.BEC.power.of.the.brushless.ESC.has.been.disabled,.connect.its.receiver.lead.to.one.of.the.female.
connectors.of.the.3”.Y-Harness.(EFLRYH3) ..Next,.connect.the.Throttle.(Channel.3).receiver.lead.of.the.3-in-1.
control.unit.to.the.remaining.female.connector.of.the.3”.Y-harness ..Then,.connect.the.male.connector.of.this..
Y-harness.to.Channel.3.(Throttle).of.the.receiver .
Содержание Blade CP Pro
Страница 39: ...39 ...
Страница 62: ...62 Notes ...
Страница 63: ...63 Notes ...
Страница 64: ...9002 2006 Horizon Hobby Inc 4105 Fieldstone Road Champaign Illinois 61822 877 504 0233 www E fliteRC com ...