E.F. Johnson Company 53SL ES Series, Руководство по эксплуатации

Страница: 99 / 190

53SL ES Series Mobile Radio Operating Manual April 2009 6-19
Project 25 Mode Features Section 6 - Conventional Mode Features
• List only - Telephone numbers can be selected from a preprogrammed list only (direct
entry as follows is not allowed)
• Unlimited - Telephone numbers can be selected from a list and also dialed directly
entered using the front panel controls or the keypad on the HHC.
All models have the capability to place telephone calls by recalling the number from a list
or dialing it using the front panel controls or using the Handheld Control Unit (HHC)
telephone keypad. More information on how to do this follows.
6.13.8.1 Access / De-Access Codes
P25 conventional telephone calls use an access code to access the system when placing a
telephone call, and a de-access code to terminate the call when it is finished. These codes
are preprogrammed in pairs by the Access/De-Access Code list, and up to 16 pair can be
programmed. Each conventional P25 channel can be programmed to automatically select
one of these code pairs. They must match the system codes, and the default code is
*1P#
(the P represents a pause).
6.13.8.2 Placing a Telephone Call
To recall from list:
1
Select the conventional channel that is programmed to select the desired access and de-
access codes.
2
Momentarily press the PHONE option switch (or make the menu selection). The
display indicates the last number dialed by alternately displaying “LAST NUM” and
the telephone number. In addition, the phone mode is indicated by the
icon.
3
If required, rotate the Select switch to display the desired number. The alias and
telephone number are alternately displayed.
4 Briefly press the PTT switch to send the access code. A dial tone sound should then be
heard. Briefly press the PTT switch again to send the digits. Proceed to Step 5 which
follows.:
For direct entry using front panel controls or the keypad on the HHC:
5 Select the conventional channel that is programmed to select the desired access and de-
access codes.
6
Press and hold the PHONE option switch until a tone sounds (approximately one
second). The alias of the last called telephone number is displayed if it is in the phone
number list. Otherwise, only the last eight digits are displayed. In addition, the phone
mode is indicated by the
icon.
7
If using the front panel controls, enter the telephone number by rotating and pressing
the Select switch. The 0-9,
*
, #, and P (pause) characters can be entered (# is displayed