53SL ES Series Mobile Radio Operating Manual April 2009
9-3
P25 Trunking Unique Features
Section 9 - Data Features
Frame Sync Seek Period
- Selects the amount of time the radio listens for a frame sync
sequence before a packet is transmitted. Times are 0 to 5000 msec., in increments of 50
msec. The default is 750 msec.
Tx Short Random Range
- Selects the maximum amount of time the radio waits to
transmit once the first qualified FS is received indicating the channel is clear. Times are
50 to 500 msec., in increments of 50 The default is 50 msec.
Tx Long Random Range
- Selects the upper range of the random range. When the
radio detects a busy, the radio uses a random time within this range (Back off delay) to
determine when to retransmit the packet. Times are 50 to 5000 mSec., in increments of
50 msec. The default is 2000 msec.
Tx Response Random Range
- Selects amount of time radio waits before rechecking a
channel's status once a busy channel status symbol has been received. Only applies to
ACKs. Times are 50 to 1000 msec., in increments of 50. The default is 1000 msec.
9.2.2
Interface Connection
The radio connects from its MDP Interface to the RS232 COM port of the computer using
the P25 Mobile Data Peripheral (MDP) Interface cable.
9.2.3
Context Activation
In order for the radio to access data service on a trunking system, it must be a valid user on
the system and it must be affiliated to an RF site. Once this is accomplished, the radio
must request data services from the trunked system through the process of context
activation; a data registration of the radio with the system. Context activation is initiated
from the radio. In an EFJohnson Technologies mobile radio, context activation is
automatically initiated when the user selects a P25 trunking system with either data
registration enabled or OTAR enabled. During a context activation, the mobile radio
attempts to access a packet data channel (PDCH) at the site and send it its request for data
services. If the context activation is successful, the mobile subscriber will receive a
response containing a IP address. This IP address will be used by the mobile radio as a
source IP address for all inbound data messages sent, and is used by the host application as
the destination IP address for all outbound data messages. If for some reason the context
activation fails, the mobile radio will not be allowed to use data services on the trunked
system. If a PPP link is established between the portable computer and mobile radio
without the radio context activated, any data transmitted by the computer to the radio is
ignored.
Содержание 53SL ES Series
