LCR7000 & RHEOSIGHTS P/N: 974194 |
Rev: A
|
ECO: 52468
www.dynisco.com
From lab to production,
providing a window into the process
-13-
Installation of the Die Swell Laser to the LCR 7000 Series Rheometer:
1.)
Swing the rheometer barrel swing arm out to ease installation of the Die Swell
Laser.
2.)
Attach the Die Swell Laser bracket by placing the (2) ¼-20 UNC Socket Head Cap
Screws through the holes in the black hinge and square stainless steel spacer
and into the tapped holes on the right collar of the Rheometer
3.)
Tighten both Socket Head Cap Screws securely.
4.)
Pivot the Die Swell Laser into operating position. If pivot tension is too low, the
“Phillips” head screw on the back of the hinge can be tightened to provide the
desired pivot tension.
5.)
Install the supplied cable to the Die Swell Laser and connect to any of the USB
ports on the Edge Device.
Configuration of Edge Device to recognize Die Swell Laser:
1.)
Turn the Edge Device “ON”
2.)
Open the RheoSights Software by double clicking the Shortcut named “Dynisco
Software Launcher” on the desktop of the Edge Device.
3.)
Log in with the default password “Dynisco” and get into the main operation page.
4.)
Click the Laser button and follow the instructions.
15.
Die Swell Laser Installation
