Dynisco ATC770, Инструкция по установке и эксплуатации

Страница: 6 / 88

6
I
NDEX
How to: See Section: Page
Wire the ATC770 4.1, 4.2 22, 23
Primary Input
Set the Primary Input Type
6.1.1, 6.1.3 31, 34
Set the Shunt Calibration 6.1.2 33
Set the Primary Input Full Scale Value 6.1.4 35
Set the Primary Input Failsafe Mode 6.1.7 36
Calibration of Primary Input
Calibrate the Primary Input to the instrument
7.1 45
With Internal Shunt 7.1.1, 7.1.2 46
With External Shunt 7.1.3 46
With Linear Input 7.1.5 47
Alarms
Set which Input the Alarms will Monitor
6.2.1 37
Set the Alarm Type (high, low, etc.) 6.2.2 37
Set the Reset Mode for Alarms 6.2.5 38
Set the Failsafe Mode for Alarms 6.2.6 38
Set the Alarm Value 6.2.7 39
Setting Control Ouput
Set the Control Output Voltage or Current
6.4.1 41
Set the Control Output Direct/Reverse 6.4.2 43
Retransmission Output
Set the Retransmission Output Voltage or Current
6.3 39
SMART Tuning of Control Output
Set the Process Set Point
7.2.1 48
Engage SMART Tuning 7.2.2 48
Engage Adaptive Tuning (In Manual Mode) 7.3.2 49
Engage Adaptive Tuning (In Automatic Mode) 7.3.4 50
Security
Set the Security Codes
6.5 44
Error Codes
Interpreting the Error Codes and Troubleshooting
9.0 57