Dynatron 150plus, Руководство по обслуживанию

Страница: 58 / 65

Dynatron ® 150 plus
52
DYNATRON 125/150 plus FINAL QUALITY CHECK
Unit S/N__________________ Software Ver._____ Date__/__/__
Repair____RS____Production____
Head SN: 5cm______________10cm______________2cm_______________1cm _______________
TECH/QC
(initials)
•
Verify all keys work; all keys have good tactile feel [ ] [ ]
•
Verify all LED’s light up [ ] [ ]
•
Verify output turns off when STOP is pressed [ ] [ ]
•
Verify continuity between soundhead and stim jack [ ] [ ]
•
Verify head temperature circuit is working [ ] [ ]
•
Verify coupling works with 5cm smart soundhead [ ] [ ]
•
Verify unit and soundhead serial number [ ] [ ]
•
Verify stim jack tight [ ] [ ]
•
Labels and Screws [ ] [ ]
•
Verify fuse rating 1.6 amp 250V slow blow [ ] [ ]
•
Verify ultrasound outoput power per table below: [ ]
5cm 2.5 Watts (0.5) 5 Watts(1.0) 10 Watts (2.0)
1 MHz 2.4 – 2.6 4.9 – 5.1 9.8 – 10.2
2 MHz 2.4 – 2.6 4.9 – 5.1 9.8 – 10.2
3 MHz 2.4 – 2.6 4.9 – 5.1 9.8 – 10.2
10cm 5.0 Watts (0.5) 10 Watts (1.0) 20 Watts (2.0)
1 MHz 4.9 – 5.1 9.8 – 10.2 19.0 – 20.4
2 mhZ 4.9 – 5.1 9.8 – 10.2 19.0 – 20.4
3 MHz 4.0 – 5.1 9.8 – 10.2 XXXXXXXX
2cm 1.0 Watt (0.5) 2.0 Watts (1.0) 4.- 0 Watts (2.0)
1 MHz 0.9 – 1.1 1.9 – 2.1 3.9 – 4.1
2 MHz 0.9 –1.1 1.9 – 2.1 3.9 - 4.1
3 MHz 0.9 – 1.1 1.9 - 2.1 3.0 – 4.1
1cm 1.0 Watt (1.0 1.5 Watts (1.5) 2.0 Watts (2.0)
2 MHz 0.9 – 1.1 1.4 – 1.6 1.9 – 2.1
3 MHz 0.9 – 1.1 1.4. – 1.6 XXXXXXXX
Ground Fault
Chassis leakage not to be greater than 75uA, and on leads 20uA.
Leakage no ground chassis_________ leads_________ chassis__________ leads___________
Leakage grounded chassis_________ leads_________ chassis__________ leads___________
Hot/Return reversed chassis_________ leads_________ chassis__________ leads___________
FAILURES
ACCEPTANCE:
Reason __________________________ Technician_______________Date____/____/____
_________________________________ QC Inspector ______________ Date____/____/____
Repaired_________________________________________________________________________________________
_____________________________________________________________________________________________
Technician Date____/____/____