Dynatron 150plus Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 65

background image

Dynatron

®

150

plus

Contraindication, Warnings, Precautions

28

POWER SHOULD BE REDUCED IF PATIENT COMPLAINS OF

PERIOSTEAL BONE PAIN (BONE ACHE)

Precautions

The Dynatron 150plus must be used cautiously in the presence of any of the
following conditions:

• When there is a tendency to hemorrhage following acute trauma or fracture.
• Acute Bursitis: Do not use in continuous duty cycle mode.

Warnings

• Do not use in general area where high-powered, high-frequency transmitting units

are being operated. Short wave diathermy should not be turned on or used at the
same time as the Dynatron 150plus.

• Do not use the same power outlet or line with a whirlpool and certain traction

machines.

• In areas which are carpeted and static electricity is present, it may be necessary to

use a conductive mat to remove any static charge from the operator.

• Use a surge suppresser if power problems are encountered.
• Avoid unnecessary exposure to Ultrasound (patient and therapist)

NOTE: For further technical information on therapeutic Ultrasound and its
physiological effects, please consult published medical literature.

Usage Cautions - Combination Treatments

When using a Stim device in conjunction with the Dynatron 150plus to output Stim
through the soundhead, observe all contraindications, warnings, precautions, and
usage cautions provided by the manufacturer for that Stim therapy along with all
contraindications, warnings, precautions, and usage cautions for Ultrasound therapy
provided in this manual.

Safety Features of the Dynatron 150plus

• The device senses coupling and soundhead temperature to help ensure proper

delivery of the ultrasonic therapy and to protect the soundhead crystal.

• The device provides complete isolation of patient connection from AC power

line.

«
...
32
33
34
35
36
...
»

Содержание 150plus


































































Отзывы:

Нет отзывов

Похожие инструкции для 150plus

Бренд: Olympus Страницы: 86

Бренд: Ultimaker Страницы: 38

Бренд: A&D Страницы: 2

Бренд: A&D Страницы: 176

Бренд: Keiser Страницы: 82

Бренд: Keiser Страницы: 4

Growers Supply 109722

Бренд: FarmTek Страницы: 9

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренд: Kärcher Страницы: 88

Бренд: Rane Страницы: 6

Бренд: Rane Страницы: 27

Бренд: Ranger Products Страницы: 6

Бренд: Rane Страницы: 88

Бренд: Haag-Streit Страницы: 21

Бренд: KERR Страницы: 32

Maestro SB-CO-DIV-008B

Бренд: Pentair Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды