Dynatron 150plus Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 65

background image

Dynatron

®

150

plus

Installation and Features

5

an optional battery power source. Only a Dynatronics-approved battery may be
used.

4. TIME DISPLAY: Treatment time is displayed here.

5. TIME SELECTION: UP/DOWN ARROW keys are used to set or change the

treatment time. Press the UP ARROW key to increase time, and press the DOWN
ARROW key to decrease the treatment time.

6. FREQUENCY KEY: This key is pressed to select the desired frequency during

treatment setup or while a treatment is in progress. Select from 1, 2 or 3 MHz.
Continue pressing the FREQUENCY key until the desired frequency is selected.

7. FREQUENCY DISPLAY: LED lights indicate the frequency that is chosen for the

current treatment. Selection is made by pressing the FREQUENCY key.

8.

DUTY CYCLE KEY: This key is pressed to select the desired duty cycle during
treatment setup or while a treatment is in progress. Select from 10, 20, 50 percent or
Continuous duty cycle. Continue pressing the DUTY CYCLE key until the desired
duty cycle is selected.

9. DUTY CYCLE DISPLAY: LED lights indicate the duty cycle that is chosen for the

current treatment. Selection is made by pressing the DUTY CYCLE key.

10. START: When this key is pressed the selected treatment starts. The timer begins

counting down and output from the soundhead is started.

11. STOP: This key is pressed to stop the output to the applicator head, resets the timer

to zero, and ends the treatment.

12. PAUSE: This key is pressed to pause an Ultrasound treatment in progress. When

the treatment is paused, the treatment timer is stopped, an LED on the PAUSE key is
lighted and the output power is stopped. Pressing the START key or the PAUSE
key will resume the treatment; the timer resumes counting down, power is delivered
to the soundhead, and the PAUSE LED light will be off.

13. POWER DISPLAY: This display shows the power selected for the current

treatment. Power is displayed in watts per square centimeter (WATT/cm

2

).

WATT/cm

2

is the intensity of the Ultrasound at the head surface; it is the total watts

divided by the effective radiating area of the head. The display may be changed to
WATTS, if desired, by pressing both the UP and DOWN POWER DISPLAY keys
at the same time; the decimal in the display will flash continuously when displaying
WATTS. The decimal remains solid when displaying WATT/cm

2

.

14. POWER SELECTION KEYS: These UP/DOWN ARROW keys are used to set or

change the POWER setting for a treatment. Press the UP ARROW key to increase
power, and press the DOWN ARROW key to decrease power.

15. ULTRASOUND OUTPUT JACK: The soundhead plugs into this jack for

Ultrasound therapy.

«
...
9
10
11
12
13
...
»

Содержание 150plus


































































Отзывы:

Нет отзывов

Похожие инструкции для 150plus

Бренд: ABB Страницы: 50

ACS880-01 Series

Бренд: ABB Страницы: 17

Бренд: ABB Страницы: 36

Бренд: Cameo Страницы: 64

Бренд: Cameo Страницы: 100

Бренд: CAME Страницы: 32

Бренд: B medical systems Страницы: 28

Бренд: Laserworld Страницы: 8

Бренд: Laserworld Страницы: 6

Бренд: LaserLiner Страницы: 56

Бренд: LaserLiner Страницы: 54

Бренд: JBSYSTEMS Light Страницы: 17

Бренд: WalkMed Страницы: 2

Бренд: Walinga Страницы: 20

Бренд: XanLite Страницы: 2

Бренд: X-Rite Страницы: 6

Бренд: Ultratune Страницы: 12

Бренд: EzCAP Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды