Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений

Страница: 133 / 337

5-46
'LVSOD\'RXEOH:LGWK/LQH&RPPDQG^'(&':/`5HPRWH
The Display Double-Width Line command displays the line occupied by the cursor (and only that
line) using double-width characters.
Since each double-width character occupies twice the normal character width, all characters
occupying the right half of the normal line disappear from
the screen. The right half that
disappears from the screen is preserved in memory and can be retrieved using the Display
Normal Line command.
When a line is changed to double-width, the cursor may move horizontally across the screen in
order to remain in the same character column position. If the line was originally a normal line
and the cursor was past the midpoint of the line, then the cursor is repositioned to the end of the
double-width line.
NOTE
This command affects both characters that were previously on the line, and those on the line that arrive
after the command is issued.
23(5$72586$*(
None. (This is a remote command only.)
+26786$*(
<ESC>#6
Changes the line occupied by the cursor to appear in double-width.