manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 221 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 221

6-31

NOTE

Undesirable results may be produced if the Custom Outline a Touchkey command is executed on a

touchkey that contains mixed line types.

If the touchkey specified in this command designates a touch cell within a touchkey (but not the
master cell), an outline is drawn around that touch cell rather than the entire touchkey.

 

23(5$72586$*(

None. (This is a remote command only.)

 

+26786$*(

<ESC>[5;<Pk>;<Pch>

x

<Pk> is a numeric parameter that specifies the touchkey to be outlined.

If<Pk> is 0 or omitted, the specified border is placed around the entire screen.

<Pch> is numeric parameter that specifies the decimal value of the first character within the
Standard or Extended Character Set to start using for the custom border.

If <Pch> is omitted, the default value 128 is used (the value of the first Boxtype 1
character when the Static Special Character Font is mapped into the Extended Character
Set).

If <Pch> is greater than 255, 255 is used.

 

3266,%/((55256

Undesirable results may be produced if this command is executed on a touchkey that contains a
mixture of line types.

If the starting character <Pch> is greater than 248, some of the outline characters will have
values greater than 255 (for example, 249 + 7 = 256). Any outline character values that would
exceed 255 use the value 255. If the starting character <Pch> is 255 or greater, all the outline
characters use the value 255.

 

(;$03/(6

<ESC>[5;;163x

Places a border around the entire screen using the eight characters from within the Extended
Character Set starting with character value 163.

<ESC>[5;153;8x

Places a border around Touchkey 153 using the eight characters from within the Standard
Character Set starting with character value 8.

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов