manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 260 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 260

8-7

NOTE

The report may differ from the above format if

 

the Reporting Format command has been issued. Refer  to

the Reporting Format command description in Chapter 4 for details.

 

3266,%/((55256

If this command is sent while the Error Interrupt Mode is set, the TCS always responds with an
indication that no new error has occurred, since it already reported the error on an interrupt basis.

 

(;$03/(6

The host sends the Request Error Status command to determine whether an error has occurred:

<ESC>[>11n

If no errors have occurred since the TCS was powered-up, reset, or the previous Request Error
Status command was received, the TCS replies:

<ESC>[>11;0n

If an Touch Panel error has occurred, the TCS replies:

<ESC>[>11;4n

If a communications parity error and a communications framing error have occurred, the TCS
replies with the first new error (the parity error) since it was last powered up, reset or polled:

<ESC>[>11;7n

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов