manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 265 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 265

8-12

 

&RQWLQXRXV,QWHJULW\7HVW&RPPDQG^)&O7`/RFDO5HPRWH

The Continuous Integrity Test command places the TCS into the Continuous Integrity Test,
which is a continuous testing loop that verifies proper operation of the TCS electronics. The
Continuous Integrity Test command activates the following tests sequentially in a continuously
repeating cycle:

•

 

ROM Checksum test

•

 

Nonvolatile Memory Checksum test

•

 

RAM test

•

 

Touch Panel closure test

NOTE

The ROM Checksum Test, the Nonvolatile Memory Checksum Test, and the RAM Test are the same as

those described in the Installation Guide under the heading, Power-Up Sequence.

Once the Continuous Integrity Test is activated, it can be terminated locally by pressing the SET
UP key on the optional keyboard, or terminated remotely by performing a Reset command.

When the test begins, any errors detected since the TCS was last powered-up or reset are cleared
and test execution begins.

 

5(68/76

The test displays the following information on the screen:

•

 

Elapsed time since test started

•

 

Overall pass/fail indicator

•

 

Number of test passes completed

•

 

Number of ROM checksum errors

•

 

Number of nonvolatile memory checksum errors

•

 

Number of RAM failures

•

 

Number of Touch Panel Test failures

•

 

Last faulty ROM checksum, reference designator of faulty ROM

•

 

Last faulty nonvolatile memory checksum, reference designator of faulty nonvolatile memory
device

•

 

Last faulty RAM address, data sent and received, reference designator of faulty RAM

•

 

RAM data pattern failure history

•

 

Touch Panel Closure Test touch cell failure

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов