manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 162 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 162

5-75

 

'()$8/76

The highlight, underline, blink, reverse-video, and concealed attributes are turned off.

Color TCS: The foreground color is white (37) and the background is black (40). The conceal
color is black (70).

 

23(5$72586$*(

For the monochrome TCS, this is a remote command only.

Color TCS: Foreground and background color are the only attributes that can be set locally by
the Setup Screen. These attributes are equally controllable by the user and host; each remains set
to the value last specified until changed by either the user or host.

 

+26786$*(

<ESC>[<PS>;...;<PS>m

<Ps> is a selective parameter, designating the character attribute(s).

If <Ps> is 0 or omitted, turn off all attributes.

If <Ps> is 1, highlight.

If <Ps> is 22, turn off highlight.

If <Ps> is 4, underline.

If <Ps> is 24, turn off underline.

If <Ps> is 5, blink.

If <Ps> is 25, turn off blink.

If <Ps> is 7, reverse-video.

If <Ps> is 27, turn off reverse-video.

If <Ps> is 8, conceal.

If <Ps> is 28, turn off conceal.

NOTE

The parameter values can be combined to select multiple character attributes with a single control string

(see examples, below). Invalid selective parameters are ignored.

Color TCS: Table 5-12 shows additional <Ps> values for the Set Character Attributes command.
These parameters are valid for the color TCS only.

7DEOH&RORU3DUDPHWHUVRIWKH6HW&KDUDFWHU$WWULEXWHV&RPPDQG

&2/25

)25(*5281'

%$&.*5281'

&21&($/

%ODFN

5HG

*UHHQ

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов