manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 99 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 99

5-12

Touchkey Visual Extent {FTKVE}

Touchkey Audible Attribute {FTKAA}

Character Displaying Commands

Display Double-Width Line {DECDWL}

Display Double-Size Line {DECDHL}

Display Normal Line {DECSWL}

Place Double-Size Line {FDSL}

Erase Character [ECH]

Erase in Line [EL]

Erase in Display [ED]

Draw Bar for Bar Chart {FDBB}

Region Commands

Outline a Touchkey {FOTK}

Outline a Region {FOR}

Custom Outline a Touchkey {FCOTK}

Custom Outline a Region {FCOR}

Modify Character Attributes in a Touchkey {FMCAITK}

Modify Character Attributes in a Region {FMCAIR}

Reverse Character Attributes in a Touchkey {FRCAITK}

Reverse Character Attributes in a Region {FRCAIR}

Erase a Touchkey {FETK}

Erase a Region {FER}

Fill a Touchkey with a Character {FFTKC}

Fill a Region with a Character {FFRC}

All commands not listed, such as the communication or the status reporting commands, are
global in nature; that is, they affect all screens. Any Setup Screen parameter changes made
locally by the user while the host has selected another screen affect the Displayed Screen only.

When the host sends the Select Screen command with a screen number of zero, subsequent
screen-dependent commands affect the Displayed Screen only. This is the way the TCS operates
if the command has never been issued.

If the screen specified in this command does not exist, a new screen is created and initialized as
described in the Initialize Screen Command chapter. The new screen exists until it is explicitly
deleted with the Delete Screen command or a hard reset is performed.

If the host selects a screen and never puts any information in it, the screen will contain the
default screen-dependent information specified in the Initialize Screen Command chapter.

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов